|
|

| Масла, спрейове / Oils, lubricants, sprays | Масла, спрейове (По марка) / Oils, lubricants, sprays (By Brand) | Мотул / Motul
|
|
МАСЛО ЗА СМАЗВАНЕ НА ВЪЗДУШЕН ФИЛТЪР A3 1000мл
|
|
MOTUL air filter cleaner A3, 1L
Motul MC Care A3 Air Filter Oil (1000ml / 1 Liter) is a high-performance, blue-colored resinous lubricant specifically engineered for the maintenance of foam air filters on off-road motorcycles (motocross, enduro), road bikes, ATVs, and UTVs.
1. Key Features & Benefits :
- Advanced Particle Entrapment: Formulated with a highly tacky (sticky) additive package, it creates a microscopic web that stops micro-particles like sand, dust, mud, and silt from bypassing the filter and causing premature cylinder or piston wear.
- Hydrophobic Barriers: It repels water and prevents moisture from entering the intake tract, even during heavy rain, river crossings, or high-humidity riding conditions.
- Reduced Pressure Drop: Unlike generic heavy oils, Motul A3 is optimized to maintain the lowest possible airflow resistance. It ensures the engine receives the maximum volume of air required for perfect air-fuel mixture combustion.
- Visual Application Control: The distinct blue tint allows for a quick visual inspection. Areas that are not blue mean the filter is unprotected.
- Foam Integrity Safe: It contains specific solvents that dissolve smoothly during application but will not degrade, dissolve, or dry out the polyurethane foam structure or the glue seams of the filter over time.
2. Technical Specifications & Product Properties
- Color: Visual Blue
- Density at 20°C (68°F): 0.812 g/cm³
- Viscosity at 40°C (104°F): 52.0 mm²/s
- Flash Point: 22.0°C / 71.6°F (Highly volatile solvents ensure rapid drying after application)
3. How to Apply Properly (Liquid 1L Method) :
- Pre-Cleaning: Deep clean the dirty foam filter using a dedicated cleaner like Motul MC Care A1 Air Filter Clean. Avoid using petrol or harsh solvents, as they break down the foam glue.
- Drying: Thoroughly rinse the filter with warm water and let it air-dry completely. Forcing oil onto a damp filter traps moisture inside and ruins airflow.
- Impregnation Method: Dip Method: Pour the Motul A3 oil into a clean, wide container. Submerge the filter until it is fully saturated.
- Bag Method (Pro-Tip): Place the clean filter inside a zip-lock plastic bag, pour a controlled amount of A3 oil inside, and massage the bag. This uses less oil and keeps your hands clean.
- Evacuation: Gently squeeze the filter to remove excess oil. Crucial: Never wring, twist, or wring out the filter like a towel, as this will tear the foam matrix.
- Flash-Off Time: Let the filter rest for 10 to 20 minutes before re-installation. This allows the carrier solvents to evaporate, leaving only the ultra-sticky blue film on the foam.
- Sealing (Optional but Recommended): Apply a thin layer of multi-purpose grease to the rubber/foam lip of the filter where it mates with the airbox to create a 100% dust-proof seal.
Motul MC Care A3 Air Filter Oil 1000мл (1 литър) е висококачествено, специализирано лепкаво масло, разработено за импрегниране на дунапренови (пенообразни) въздушни филтри. То е предназначено за офроуд мотори (ендуро, мотокрос), шосейни мотоциклети, ATV и UTV машини.
1. Ключови предимства и характеристики:
-Максимална защита на двигателя: Благодарение на силно полепващата си формула, продуктът ефективно улавя и задържа прах, фин пясък, кал и мръсотия, предотвратявайки навлизането им в горивната камера.
- Водоустойчивост: Не позволява на водата и влагата да проникнат през филтъра, което е критично при преминаване през водни препятствия или каране в дъжд.
- Оптимален въздушен поток: Разработено е така, че да не затормозява преминаването на въздух, подпомагайки правилната работа на карбуратора/инжекциона и запазвайки мощността на двигателя.
- Син цвят за визуален контрол: Маслото е синьо, което ви помага да видите дали сте го нанесли равномерно по цялата повърхност на филтъра и дали има пропуснати участъци.
- Бързо съхнене: Продуктът изсъхва бързо след нанасяне, без да се стича в кутията на филтъра.
2. Начин на употреба (стъпка по стъпка) :
- Почистване: Преди да нанесете новото масло, филтърът трябва да е перфектно измит и обезмаслен. Производителят препоръчва използването на почистващ препарат Motul A1 Air Filter Clean.
- Изсушаване: Оставете филтъра да изсъхне напълно след измиване
- Нанасяне: Изсипете част от маслото Motul A3 в подходящ чист съд (ваничка) и потопете дунапреновия филтър, за да поеме течността равномерно.
- Изцеждане: Извадете филтъра и внимателно го притиснете, за да отстраните излишното количество масло. Важно: Не усуквайте филтъра, за да не скъсате дунапрена!
- Изчакване: Преди да монтирате филтъра обратно в мотора, го оставете да престои около 10–15 минути, за да се изпарят разтворителите и маслото да придобие своята лепкава консистенция.
Производител: MOTUL
Доставно тегло: 0,965 кг
|
| |
Назад
|