| 
                            SIMSON Horn (signal horn) 6V - Steel cover - (fastened on middle housing part) - MZAOrderNo.: 10782
 GTIN/EAN: 4056144006268
 PartNo. Simson: 204921
 Description:
 Horn 6V - chrome-plated - fastening to the middle of the housing - for mounting on the air filter box - incl. holder - very good quality.
 Note: The signal horn is preset from the factory and usually does not have to be adjusted any further. However, it can happen that you have to readjust the horn to adjust the pitch and volume. This adjustment is made using the lower adjusting screw between the two contact shoes. To do this, the signal horn must be operated at the same time. It is important to ensure that the lower adjustment screw is not pressed through the membrane, as this will damage it. Please do not work beyond the noticeable resistance, otherwise there will be a total failure. Please then again counter the adjustment screw to accept the settings.
 Applicable to:
 Simson S50
 Simson S51 6V
 Simson S70 6V
 Simson SR2 / SR2E
 Simson SR4-2 Star
 Simson SR4-3 Sperber
 Simson SR4-4 Habicht
 Simson Schwalbe KR51/1 S
 Simson Schwalbe KR51/1
 
 Meyer Zweiradtechnik Ahnatal - MZA GmbH
 
 |