SIMSON Horn (signal horn) 12V - Steel cover - (fastened on middle housing part) - MZA
OrderNo.: 10782A
GTIN/EAN: 4056144008996
PartNo. Simson: 204921
Description:
Horn 12V - chrome plated - fastening to the middle of the housing - for mounting on the air filter box - incl. holder - very good quality - diameter approx. However, it can happen that you have to readjust the horn to adjust the pitch and volume. This adjustment is made using the lower adjusting screw between the two contact shoes. To do this, the signal horn must be operated at the same time. It is important to ensure that the lower adjustment screw is not pressed through the membrane, as this will damage it. Please do not work beyond the noticeable resistance, otherwise there will be a total failure. Please then again counter the adjustment screw to accept the settings.
Applicable to:
Simson S51 12V
Simson S53
Simson S70 12V
Simson S83
Simson SR50/1
Simson SR50
Simson SR80/1
Simson SR80
Simson Schwalbe KR51/2 1981->
Simson Schwalbe KR51/2 E
Simson Schwalbe KR51/2 L
Simson S.050 TS
Simson S.050 SC
Simson Sperber MS50
Simson Wheeler SD50
Meyer Zweiradtechnik Ahnatal - MZA GmbH
|