| 
                            https://www.youtube.com/watch?v=IVi4I0_2G6g
 ENGINE FOR A BICYCLE Zeda-4T49PL - 142F 50 4T (49cc)
 
 Features:
 Zeda 49cc 4 stroke pull start petrol conversion kit fits for normal 28” V frame bike and 26” ATV bike , both with 28-40mm frame tube.
 49cc 4 stroke pull start petrol conversion kit are more stable, more reliable and quieter than the 2 stroke rivals.This bike motor kit comes with everything that you will need, except gas and oil! You will be able to stop or start the engine as you ride.
 Fuel consumption: 2 litre fuel per 100km.
 With 44 tooth 9 hole sprocket, this motor is with max speed 43-51 Km/h (Depending on bike size, load and road conditions).
 Comes with all needed hardware for easy installation.
 
 Specifications:
 1. Engine Model: 142F
 2. Engine Type: Air-cooled, 4-Stroke, OHV, single cylinder
 3. Bore x Stroke: 41.8 x 36 mm
 4. Displacement: 49 cm3
 5. Compression Ratio: 8.0 : 1
 6. Net Power Output: 1.6kW (2.1HP) at 7,000 rpm
 7. Net Torque: 2.7 Nm at 4,500 rpm
 8. PTO Shaft Rotation: Counterclockwise (from PTO shaft side)
 9. Ignition System: Transistorized magneto ignition
 10. Starting System: Recoil Starter
 11. Carburetor: Float Type
 12. Lubrication System: Forced Splash
 13. Governor System: Centrifugal Mechanical
 14. Oil Capacity (for luburati oil): 0.25l
 15. Engine oil: SAE 10W30 / 10W40
 16. Fuel Tank Capacity (liter): 1,89l
 17. Fuel type: regular unleaded petrol
 18. Air Cleaner: Semi-dry Type
 19. Throtle: Twist-Grip
 20. Clutch: automatic centrifugal
 21. Gearbox: Lowering reduction gearbox
 22. Transmission: chain drive
 23. Dimensions: (L x W x H) 225mm x 274mm x 353mm
 24. Engine dry weight: 5.5 kg
 25. Net set weight: 13 kg
 26. Gross set weight: 14.5kg
 
 Package included:
 1x 49cc 4 stroke engine
 1x Gas tank (1.89L), gasoline fuel line
 1x fuel filter
 1x Adjustable chain idler
 1x 44 tooth 9 hole sprocket
 1x Chain guard
 1x Extra wide crank/sprocket
 1x Fiber sprocket mounting rings, 9 sprocket bolts, 3 metal retaining segments
 1x Engine Mounting plate with universal mounting brackets
 1x Spark Plug Wrench
 1x Misc.mounting bolts with nuts
 1x 415 chain
 1x Twist grip throttle with built-in kill switch
 1x Adjustable throttle cable
 1x Silencer
 
 Note:
 Installation instruction not included.
 It is recommended to find a professional to install or refer to videos by searching "49cc bike motor installation".
 Examples:
 https://www.youtube.com/watch?v=5ADjEgJnE2I
 https://www.youtube.com/watch?v=Xb__JyAeahw
 https://www.youtube.com/watch?v=IVi4I0_2G6g
 
 |